Decokoncept
Bestseller

Ultra Slab System

C² Hard Blend™

Hybrydowy utwardzacz: wysokie parametry utwardzenia, zatrzymanie pylenia i większa odporność na ścieranie w atrakcyjnej cenie.

SKU PROD 000010 · 20 l

A harder, easier to maintain concrete surface can be achieved with one straightforward treatment. C² Hard Blend™ uses a blend of silicates to strengthen trowelled, honed or polished concrete.

In stock

1

Unit: op.

Need help? Ask our advisors

Calculate how much you need

Concrete condition / substrate

First coat

m²/20 l
m²/l

You can adjust coverage after a site trial. Starting values come from the product card.

  • A harder, easier to maintain concrete surface can be achieved with one straightforward treatment. C² Hard Blend™ uses a blend of silicates to strengthen trowelled, honed or polished concrete.
  • The treatment quickly penetrates and reacts with the concrete, creating a denser, more abrasion resistant surface. Subsequent polishing can further enhance the floor's appearance.
  • A one step application without scrubbing simplifies the crew's work, and the surface can return to use after drying. It is an option for new and existing floors where durability, efficient installation and easier maintenance are priorities.

FAQ

Questions about this product

Answers matched to this product and its pack sizes.

  • How does hardening concrete with lithium silicate differ from sodium silicate?Show answer

    Both technologies harden concrete, but C² lithium silicates work faster, penetrate the concrete structure effectively and reduce the risk of white deposits.

    The main differences according to the Crete Colors comparison:

    Greater abrasion resistance: in tests presented by the manufacturer, lithium silicate achieved an improvement of over 60%, while sodium and potassium products achieved about 30%.

    Faster effect: the manufacturer states that lithium hardening develops its properties within 7-14 days, whereas traditional sodium products may need significantly longer.

    Deeper penetration: lithium technology makes it easier for the product to penetrate the concrete structure and densify it evenly.

    Fewer application problems: a lower risk of white efflorescence and deposits, and less need for additional washing of the surface.

    Why does it work? Lithium silicate reacts with the calcium hydroxide present in concrete, forming additional C-S-H compounds that densify and strengthen its structure. The result is greater abrasion resistance and effective reduction of dusting.


    Which lithium hardeners does Decokoncept offer?

    C² ECO HARD: for economical hardening and dust reduction of concrete.

    C² Hard Blend: for densifying and improving the properties of concrete surfaces.

    C² Hard: our most popular lithium silicate based hardener, for new and existing floors.

    C² Super Hard: a premium product for particularly demanding surfaces, including weak, porous and heavily dusting concrete.


    What do you gain? A more durable floor, less dusting, greater abrasion resistance and lower maintenance costs.

    Contact Decokoncept. We will choose the right hardener for the quality of your concrete, so you do not overpay for a product you do not need.

  • How does Ultra Slab 1 help when laying a new concrete floor?Show answer

    Ultra Slab 1 is a product that supports the placing and troweling of fresh concrete and is used in two stages.

    The first application, immediately after the concrete is placed, reduces water evaporation caused by sun, drafts and high temperature. It helps retain the moisture needed for proper cement setting, supports the setting process and reduces the risk of premature drying of the surface.

    The second application, before power troweling with pans begins, makes the concrete easier to work without the need to add water, which could weaken the top layer. It enables safer use of DST hardening toppings and helps achieve a more even floor colour.

    After troweling is finished, we recommend applying Ultra Slab C, which cures the fresh concrete and provides its initial chemical hardening.

    Benefits for the contractor: easier troweling, a reduced risk of drying out and weakening the surface, safer execution of DST floors and a more uniform appearance of the finished concrete.

  • Can water be added to the concrete surface during troweling?Show answer

    Water should not be added to the concrete surface during troweling! Although in emergency situations contractors sometimes resort to it, it can seriously weaken the top layer of the concrete, especially when DST hardening toppings are used. The consequences can be micro-cracks, so-called crazing, reduced abrasion resistance and even delamination of the surface hardening.


    The solution is Ultra Slab 1. The product reduces overly fast water evaporation, protects the surface from the effects of sun and drafts, and helps retain the right amount of cement paste, which contractors call "butter".


    As a result, the concrete is easier to trowel, the DST topping spreads better, and the contractor can avoid the risky addition of water.


    Ultra Slab 1 eliminates one of the most common causes of problems during troweling, making it easier to produce a durable and even concrete floor.

    używanie wody podczas zacierania posadzki betonowej jest niedozwolone
  • What should I do when a concrete floor dusts?Show answer

    Dusting of a concrete floor often results from a weakened, porous surface layer and the lack of adequate chemical hardening of the concrete.


    The solution is to use a silicate based hardener, preferably lithium. The product penetrates the concrete structure and reacts with the calcium hydroxide present in it, forming additional binding compounds C-S-H (calcium silicate hydrate). This reaction densifies and strengthens the near-surface layer, increases its abrasion resistance and effectively reduces dusting.


    At Decokoncept we offer the full range of Crete Colors hardeners:


    C² Hard: our most popular lithium silicate based hardener, intended for effective hardening and densifying of concrete floors.


    C² Super Hard: our strongest product for particularly demanding cases, when the concrete is very weak, porous and dusts heavily. It delivers significantly better surface properties even on difficult substrates.


    A correctly selected and applied hardening system can provide protection against dusting for many years, even up to 20 years under suitable operating conditions. Giving such a warranty, however, requires an assessment of the condition of the concrete and agreement on the conditions of use.


    Is your floor dusting? Contact Decokoncept. We will help assess the problem and choose the most effective product to permanently reduce dusting without replacing the floor.

  • Co to jest „rak betonu” (ASR) i dlaczego warto wybrać utwardzacz na bazie litu zamiast sodu?Show answer

    „Rak betonu”, czyli ASR (Alkali-Silica Reaction), to reakcja zachodząca pomiędzy reaktywną krzemionką w niektórych kruszywach a silnie alkaliczną cieczą w porach betonu. Powstający żel chłonie wodę i pęcznieje, co może prowadzić do spękań i stopniowego niszczenia posadzki. Rozwojowi uszkodzeń sprzyja jednoczesna obecność reaktywnego kruszywa, alkaliów i wilgoci.


    Wybór chemii do utwardzania betonu ma znaczenie. Tradycyjne preparaty na bazie krzemianu sodu wprowadzają dodatkowy sód, który w betonie podatnym na ASR może sprzyjać tej reakcji. Ich aplikacja bywa również bardziej pracochłonna: wymaga wcierania, płukania i dokładnego usuwania pozostałości. Pozostawiony nadmiar może tworzyć białe osady i plamy. Przykładowo producent preparatu sodowego PS108 zaleca dokładne płukanie właśnie w celu ograniczenia białego nalotu.


    Dlatego rośnie popularność utwardzaczy na bazie krzemianu litu. Technologia ta jest stosowana przez amerykańskich producentów i dostępna na rynkach międzynarodowych. Łączy utwardzanie i ograniczenie pylenia z prostszą aplikacją. C² Hard i C² Super Hard nie wymagają szorowania ani płukania podczas prawidłowo wykonanej aplikacji, a producent deklaruje, że nie inicjują ani nie wspomagają powierzchniowej reakcji ASR.


    W naszej ofercie znajdziesz preparaty litowe C² Eco Hard, C² Hard i C² Super Hard, a także Ultra Slab Plus — hybrydową mieszankę krzemianów litu i potasu, opracowaną do posadzek zacieranych mechanicznie i polerowanych. Dobieramy produkt do chłonności, stanu i sposobu wykończenia betonu, aby uzyskać trwałe utwardzenie oraz ułatwić wykonanie prac. Zapytaj nas, który preparat C² będzie odpowiedni do Twojej posadzki.

    an example of cracking in concrete flooring caused by ASR reaction, known as concrete cancer
  • Czym jest certyfikat NSF i po co się go stosuje?Show answer

    NSF to niezależna organizacja, która sprawdza produkty pod kątem bezpieczeństwa i higieny. Certyfikat NSF oznacza, że dany produkt został przebadany i spełnia wymagania określonej normy. W zależności od certyfikatu sprawdzane mogą być także materiały i miejsce produkcji.


    Warto pamiętać, że certyfikaty NSF dotyczą konkretnych produktów i wymagań. Dlatego najlepiej sprawdzić, czego dokładnie dotyczy certyfikat danego produktu.

    NSF Logo – an independent organization that tests and certifies products for safety and hygiene.
  • Which concrete hardener is the cheapest?Show answer

    It depends on the floor. The lowest price per litre does not always mean the lowest cost per square metre. What counts is the composition of the whole product: the content of silicates and other compounds that affect penetration, the course of the reaction and the depth of action in the concrete. The individual components are chosen so that the product works appropriately for the type and absorbency of the surface. In the case of heavily damaged concrete, a cheaper product may require greater consumption and still not deliver the expected result.


    An economical solution is C² ECO HARD, a lithium silicate based hardener. A popular choice is also C² Hard Blend, a hybrid product combining lithium silicate with a small amount of potassium silicate. Contractors often use it on large areas when they want a good result at a reasonable cost. With correct selection and application, it helps achieve an even finish without streaks and efflorescence, and a good gloss.


    If you describe the condition of the floor and the planned scope of work, we will help you choose a product and estimate consumption and cost per square metre.

See all FAQ questions